Solar energy contractors in USA
Facilities

Facilities

All these installations were done and are located in Europe and are an example of the types of intallations that we plan to introduce in the United States. We are looking for business partners in the U.S. If interested, please do not hesitate to contact us at info@soliclima.com

Selected Facility
Solar panels in Virginia
Isolated PV installation for a home in Montreal

This is an autonomous photovoltaic system for a house in Sant Pere de Ribes. The installation has a capacity of 2.34 kWp for an average consumption of 5.82 kWh/day.

The installation consists of 12 photovoltaic plates of 130 Wp each, a solar regulator, 24 batteries of 930 A, a 7 kW inverter and a 6 kVA generator to charge the batteries during periods of bad weather. Image of the 24 batteries where the energy is stored.

The batteries used in these types of facilities are stationary batteries, which are more expensive than block (car-type) batteries, but, they last longer and require less maintenance.

We take this opportunity to clarify the terms related to the plates, about which, there is considerable ambiguity. When the terms plate or panel are used, we are referring to plates or panels that can be both, photovoltaic and thermal, but, when we use the term module, we always refer to photovoltaic energy and, if the term collector is utilized, there is no doubt that we are talking about solar thermal energy.

Rural electrification Facilities
1 - 2

Rural electricity supply

Solar photovoltaic installation in a home isolated from the grid in New Mexico 5 photovoltaic plates of 160 Wp each, were installed in a house without connection to the grid, to generate electricity. The installation also includes a solar regulator and stationary 24 V batteries, to accumulate the energy.

Photovoltaic energy in Arizona

PV installation in an isolated home, lived in year-round, in Arizona A photovoltaic system was requested for a home isolated from the grid, to feed the power consumption of the dwelling. With that in mind, 8 photovoltaic plates of 150 Wp each were installed in a field next to the house, in addition to a solar regulator, batteries and an inverter. The installed capacity is 1.2 kWp for an average consumption of 4.2 kW /day.

Rural electrification in Colorado

Installation for a single family home lived in year-round in Colorado. Rural electrification Autonomous photovoltaic system for daily use in single-family home with 10 plates of 125 W each, a solar regulator, 2 batteries of 12 V, a 2200 W inverter and a 8.6 kVA generator .

Photovoltaic in Arkansas

Photovoltaic plates in isolated farmhouse in Arkansas This installation consists of 20 photovoltaic plates of 165 Wp each, a solar regulator, 24 stationary 2 V batteries and an inverter with a capacity of 1200 W. It also includes a 7kVA generator.

Photovoltaic energy in Delaware

Photovoltaic plates mounted on pergola in Delaware Photovoltaic system consisting of 6 plates of 150 Wp each, a solar regulator, stationary batteries 1200 A at 24 V.

Rural electrification

Photovoltaic energy installation for an isolated dwelling in Florida What constitutes a photovoltaic system for a rural home?

Isolated PV installation for a home in Montreal

This is an autonomous photovoltaic system for a house in Sant Pere de Ribes. The installation has a capacity of 2.34 kWp for an average consumption of 5.82 kWh/day.

Autonomous PV installation on a mast for a single family home in South Carolina

The installed power is 780 Wp for an average consumption of 2336 Wh/day.

ecoestadistica.com